To return to the Product Listing, please click this line.

Athletic Plastisol Ink – GI-AT Series
For use with 100% Polyester or Nylon Bleed-Prone textile substrates

Phthalate Free
Highly pigmented
Superb Opaque for dark-colored backgrounds.
In Compliance with CPSIA (Consumer Product Safety Improvement Act-2008 Section 101 Lead Content in substrates (<300 ppm lead) and Section 108 Phthalates (<.1% DBP DEHP,DINP,DIDP)

DESCRIPTION: GI-AT Series is popularized for its strongest Bleed Resistant characteristics on dark-colored or bleed-prone textiles. It assures non-migration of fabric dye into the print and leaves a very high opaque, soft-hand finish.

GI-AT Series is ready-to-use straight from the container.

Important Note: Always store container with lid on to ensure consistently smooth viscosity.

Note: Pre-test on actual substrate before any full production run, for dye bleeding, adhesion, wash fastness and other desired effects.

FINISH: Durable, soft-hand finish.

COLORS: Available low-bleed opaque colors; formulated using non-leaded pigments.

SCREEN FABRIC: Mesh counts up to 160 mono filament polyester (64T European Mesh).

STENCIL: Dual-sensitized direct.

MODIFICATIONS: In situations where bleed resistance and opacity is not crucial, extend with GI-GP 081 Clear Extender Base for longer ink mileage.

To reduce ink viscosity with RE703 or RE704, add 1-5% or less (by weight of ink). Reducer is to be used very sparingly and only when RE705 can be added up to 5-10% (by weight of ink) if Bleed Resistance, Opacity, or color shade, is not crucial.

SQUEEGEE: When printing textiles, use a medium hard (65-75 durometer) squeegee.

STORAGE: Plastisol responds to heat. Always store at cool room temperatures below 90°F (32°C). Avoid exposing inks to elevated temperatures before printings.

PACKAGING:
1- quart (0.945 Liter)
1-gallon (3.78 Liters)
5-gallon (18.9 Liters) containers.

Drums available in 30-gallon (113.4 Liters) and 55-gallon (207.9 Liters) by Special telephone Order

SAFETY & HANDLING: Refer to Material Safety Data Sheet (MSDS) for complete information.

WASH UP SOLVENT: T-125 Wash up or equivalent / SC-510 Bio. Wash up. (Non-Petrochemical)

MODIFIERS: GI-GP081-Clear Extender Base / RE703-Quick Flash Reducer / RE704 – Clear Reducer / RE705 – Curable Reducer